Office
 

Microsoft Visio 2010 : Tips for Creating Network Diagrams

 
11/15/2011 3:22:17 PM
Visio does a good job at two types of network diagrams: logical network diagrams and rack equipment elevation drawings. Let’s look at a few tips for both kinds.

Logical Network Diagrams

Visio’s logical network shapes, such as those found on stencils like Computers and Monitors, Detailed Network Diagram, Network and Peripherals, Servers, and so on, have a 3D or isometric style.

If you connect them with straight connectors, diagrams look okay. But if you use right-angled connectors, diagrams don’t quite look right. The middle example in Figure 1 shows this awkwardness.

Figure 1. A simple network diagram using Visio’s Straight and Right Angle connectors and Visio Guy’s Oblique connector.


The connectors in the right-most example of Figure 8.5 do look correct, however. If you want to create network diagrams that look like this, go to my website, where you can download “Oblique Connectors for Your 3D Diagrams” for free. Here’s the address:

http://www.visguy.com/2007/10/29/oblique-connectors-for-your-3d-diagrams/

If you are a Pro or Premium user, you can really enhance your logical network diagrams. You can use Link Data and Data graphics,Data Graphics to really enhance your drawings by highlighting details without obscuring the landscape of the network.

Rack Diagrams

Rack diagrams (available in Pro and Premium) depict scaled elevation views of actual closet racks and equipment. The shapes used in these diagrams are accurately drawn, and they snap into racks in a manner similar to real world hardware.

Placing and Attaching Rack Shapes

The equipment shapes for Visio rack diagrams are 1D shapes. Normally, 1D behavior is reserved for lines, arrows and connectors where “begin” and “end” are defining characteristics of the shape.

A rack equipment shape, therefore, seems an unlikely candidate for 1D-ness. However, the ends of 1D shapes glue nicely to connection points. And shapes for the racks themselves can be built with lots of connection points located exactly where the screw holes in real racks are. For this reason, Visio rack equipment shapes evolved as 1D shapes.

Figure 2 shows a rack with several pieces of equipment glued to it. If the rack is moved, all the equipment moves with it, thanks to the glued 1D handles.

Figure 2. A Patch Panel being glued to a rack. Note the connection points located at standard rack units along both rails. Some joker has glued the Power Strip crooked by regluing one end.


You might think that Containers could do this job rather well, and you might well be right. But rack equipment diagrams have existed since the very early versions of Visio when 1D shapes and connection points were the best option. Containers are new in Visio 2010, so it remains to be seen whether rack solutions get updated and improved. Since there is a huge volume of existing third-party network equipment shapes, it might be more trouble than it’s worth.

In Figure 2, the “2U,”“3U,”“1U,” and so on text denotes how tall each piece of equipment is in “rack units.” Rack guys think in terms of rack units because they mount everything to rack chasses, which are drilled with standard-spaced holes. You can turn off this text by right-clicking any shape.

If you’d rather label rack units using a dimension line, you may be interested in the “Rack Unit Dimension Line” shape, available for free from Visio Guy at

http://www.visguy.com/2007/04/01/rack-unit-dimension-line/


Finding Rack Equipment Shapes

With rack diagrams, the name of the game is realistic-looking shapes. With folks who make rack diagrams, it seems the more accurate and more beautiful the shape, the better!

Visio comes with a smattering of general-purpose shapes. But many sources of manufacturer-specific shapes exist out on the Web. Some even sell a subscription service so you get the latest shapes when new products are released.

Following are a few places to look. There are free stencils, for-sale products, and free samples to get you interested in the commercial offerings.

Another tip is to look at network equipment manufacturers’websites. Many firms commission Visio shapes to represent their product lines and then give the shapes away free—or at least to their customers for free.

 
Others
 
- Microsoft PowerPoint 2010 : Working with Images (part 3) - Modifying Images
- Microsoft PowerPoint 2010 : Working with Images (part 2) - Inserting Screenshots & Working with Photo Albums
- Microsoft PowerPoint 2010 : Working with Images (part 1)
- Microsoft PowerPoint 2010 : Using Animation Painter & Previewing an Animation
- Microsoft Excel 2010 : Using Slicers to Filter a PivotTable
- Microsoft Excel 2010 : Working with PivotTable Data
- Microsoft Outlook 2010 : Managing a Calendar - Adding an Appointment
- Microsoft Outlook 2010 : Managing a Calendar - Viewing Your Calendar
- Microsoft OneNote 2010 : Customizing the OneNote Workspace (part 2) - Adding Commands to the Ribbon
- Microsoft OneNote 2010 : Customizing the OneNote Workspace (part 1) - Changing the Location of the Quick Access Toolbar
- Microsoft Project 2010 : Using Groups (part 2) - Custom Groups
- Microsoft Project 2010 : Using Groups (part 1) - Built-in Groups
- Microsoft Access 2010 : Creating an AutoExec Macro
- Microsoft Access 2010 : Converting a Macro to VBA Code
- Microsoft Word 2010 : Adding Supplementary Elements - Working with Pages
- Microsoft Word 2010 : Creating an XPS Document
- Microsoft Visio 2010 : Tips for Creating Process and Flowchart Diagrams (part 1)
- Microsoft Visio 2010 : Tips for Creating Process and Flowchart Diagrams (part 2)
- Microsoft PowerPoint 2010 : Applying a Custom Animation to an Object
- Microsoft PowerPoint 2010 : Choosing How to Advance a Slide
 
 
Most View
 
- Windows 7 : Installing a Modem for Dial-Up Service
- Windows 7 : Authenticating Users - How to Use Credential Manager
- Windows 8 : Creating and using Hyper-V virtual machines (part 3) - Using a Hyper-V virtual machine
- Developing, Integrating, and Building Applications in Sharepoint 2013 (part 3) - User Interface Integration - Ribbon and Action Menus
- Migrating to Exchange 2013 : Moving Mailboxes - Preparing for Inter-Org Mailbox Moves
- Windows Server 2008 R2 Remote Desktop Services : Installing and Configuring Remote Desktop Services (part 10)
- Exchange Server 2013 : Deploying an Exchange 2013 server (part 3) - Recovering a failed server
- Diagnosing SQL Server 2012 Using Extended Events (part 4) - Extended Events Terminology - Filters, Targets
- Microsoft Lync Server 2013 Edge Server : Edge Server Installation (part 5) - Creating Certificates
- Microsoft Visio 2010 : Aligning and Arranging Shapes (part 7) - Controlling Front-to-Back Positioning
 
 
Top 10
 
- Windows 8 : Customizing the Lock Screen - Customizing the Lock Screen Background,Controlling the Apps Displayed on the Lock Screen, Disabling the Lock Screen
- Microsoft Visio 2010 : Cleaning Up Documents - Setting Document Properties,Removing Personal Information , Reducing File Size
- Microsoft Visio 2010 : Working with SharePoint - Working with Files in Document Libraries
- Microsoft Visio 2010 : Exporting Visio Graphics to Other Formats
- Microsoft Visio 2010 : Using Visio Graphics with Other Applications
- Microsoft Visio 2010 : Saving Visio Files in XML Format, Saving Files in Older Visio Formats
- Active Directory 2008 : Managing OUs (part 3) - Delegating Control of OUs
- Active Directory 2008 : Managing OUs (part 2) - Administering Properties of OUs
- Active Directory 2008 : Managing OUs (part 1) - Moving, Deleting, and Renaming OUs
- Windows 8 for Business : Features Exclusive to Windows 8 Enterprise,Windows RT and Business